Product Showcase

Showing 1–12 of 41 results

  • 3.2V Single Cell

    3.2V Single Cell

     LiFePO4 Battery

    This product is mainly applied to solar lawn garden lights, night fishing lights, mining lights, strong lights, monitoring equipment, heaters, energy storage backup power, mobile backup power, amplifiers, toys, water pumps, inflatable pumps, stirrers small appliances and other electronic equipment.

    tell respectfullyThis product does not come with a protection board, so it is strongly recommended to use a standard high-quality constant-current and constant-voltage function of the special balance charger for charging; in order to be safe, remember to charge under supervision, and cut off the power supply immediately after full.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 3.65V, and then 3.65V constant voltage (CV) charging to current less than 0.01C.
    Maximum charging current: 1C / 0.2C below 10°C
    Continuous discharge current: 1C/0.5C below 10°C
    Maximum discharge current: 2C/0.5C below 10°C
    Discharge cutoff voltage: 2.0V
    Minimum storage voltage: 3.2V, otherwise it should be recharged in time

     

    Temperature Characterization:
    Charging: 0~45℃ Discharging: -20~60℃ Storage: -10~45℃
    Relative humidity: 45~85%

  • 3.7V~Low Temperature Series

    3.7V~Low Temperature Series

     Special Batteries

    This series of products are mainly applicable to various wireless portable electronic products or equipment used in low temperature environment, such as wireless equipment for cold storage, outdoor snow/extreme cold area adventure equipment, car recorder, GPS, tire pressure monitor, portable refrigeration instrument, outdoor work instrument, solar street lamp/lawn lamp, emergency power supply, etc.
    Most of the batteries in this series are compatible with the corresponding models of ordinary digital type batteries, and the performance is more stable in room temperature environment.

     

    Electrical Characteristics: 
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V, and then 4.2V constant voltage (CV) charging to current less than 0.01C.
    Discharge cut-off voltage: 2.75V
    Minimum storage voltage: 3.7V, otherwise it should be recharged in time

     

    temperature characteristic::
    Charging: 10~45°C Discharging: ultra-low temperature:-40~55℃; low temperature:-20~55°C    Storage: 0~25℃(-20°C for 4 hours)
    Relative humidity: 45~85%

  • 3.7V~Power Series

    3.7V~Power Series

     Power Battery

    This series of products have medium/high rate high current discharge capacity and strong power! Mainly applicable to a variety of medium/high power cordless portable electronic products, toys or equipment, such as drones, boat models/car models/aviation models, hand drills/dowel cutters/hole punches/water pumps/air pumps and other power tools, railcars/story learners/water pistols and other children's toys, CS catapult toys, blender/juice maker/bottle opener/atomizers and other small cordless home appliances, and so on.
    Most of the batteries in this series are compatible with the corresponding models of ordinary digital type batteries, and the performance is more stable when discharged at ordinary multiplication rate.

     

    Electrical Characteristics: 
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V, and then 4.2V constant voltage (CV) charging to current less than 0.01C.
    Discharge cut-off voltage: 2.75V / 3.3V at high magnification
    Minimum storage voltage: 3.7V, otherwise it should be recharged in time

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • 3.7V~Wide Temperature Range Series

    3.7V~Wide Temperature Range Series

     Special Batteries

    This series of products are mainly applicable to various wireless portable electronic products or equipment used in wide temperature range (i.e. large temperature difference) environment, such as car recorder, tire pressure monitor, heating/cooling/temperature regulating instruments, cold injection molding products, outdoor work/expedition/duty/driving equipment, solar lighting, GPS, outdoor testing instruments, etc.

    Most of the batteries in this series are compatible with the corresponding models of ordinary digital/high-temperature/low-temperature batteries, and the performance is more stable in room temperature environment.

     

    Electrical Characteristics: 
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V, and then 4.2V constant voltage (CV) charging to current less than 0.01C.
    Discharge cut-off voltage: 2.75V
    Minimum storage voltage: 3.7V, otherwise it should be recharged in time

     

    temperature characteristic::
    Charge: 10~45℃ Discharge:-20~80℃    Storage: 0~25℃(4 hours at -20 or 80°C limit)
    Relative humidity: 45~85%

  • 3.7V~Digital Series

    3.7V~Digital Series

     Lithium Polymer Battery

    This series of products are mainly suitable for Bluetooth/wireless devices, recording/dot-reading pens, Walkman/speaker/MP3/amplifier, rechargeable lighters, mobile backup power, medical devices, smart home/IoT, navigators (GPS), cell phones, toys, and other kinds of electronic products or devices.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V, and then 4.2V constant voltage (CV) charging to current less than 0.01C.
    Maximum charging current: 0.5C | 0.2C below 20°C
    Continuous discharge current: 0.5C | 0.1C below 10℃.
    Maximum discharge current: 1C | 0.2C below 10℃.
    Discharge cut-off voltage: 2.75V
    Minimum storage voltage: 3.7V, otherwise it should be recharged in time

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • 3.7V~High Temperature Series

    3.7V~High Temperature Series

     Special Batteries

    This series of products are mainly applicable to various wireless portable electronic products or equipment used in high temperature environment, such as car recorder, tire pressure monitor, heating instrument, cold injection molding products, outdoor instrumentation and so on.
    Most of the batteries in this series are compatible with the corresponding models of ordinary digital type batteries, and the performance is more stable in room temperature environment.

     

    Electrical Characteristics: 
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V, and then 4.2V constant voltage (CV) charging to current less than 0.01C.
    Discharge cut-off voltage*: 2.75V
    Minimum storage voltage: 3.7V, otherwise it should be recharged in time

     

    temperature characteristic::
    Charge: 10~45℃ Discharge: -10~80℃    Storage: 0~25℃(4 hours at 80°C)
    Relative humidity: 45~85%

  • 3.8V~High Voltage Series

    3.8V~High Voltage Series

     Lithium Polymer Battery

    This series of products are mainly suitable for Bluetooth/wireless devices, recording/dot-reading pens, Walkman/speaker/MP3/amplifier, rechargeable lighters, mobile backup power, medical devices, smart home/IoT, navigators (GPS), cell phones, toys, and other kinds of electronic products or devices.
    This series of batteries have higher energy density compared to the corresponding models of ordinary 3.7V batteries, which can provide more energy output and longer endurance.

     

    Electrical Characteristics: 
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.35V, and then 4.35V constant voltage (CV) charging to current less than 0.01C.
    Discharge cut-off voltage: 2.8V
    Minimum storage voltage: 3.8V, otherwise it should be recharged in time

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • 5V Boost Lithium Battery

    5V Boost Lithium Battery

     Special Batteries

    This series of products can maintain a constant voltage output of 5V, and small currents will not automatically cut off the circuit.It can be charged by a regular 4.2~5V charger or USB port, and the charging port can also be used as a normal 3.7V lithium battery.

    Mainly applicable to all kinds of 5V/4.8V DC input voltage microcontroller / host computer, sensors, small LED lamps / USB fans, time and attendance machines, micro-motor, wireless WIFI bluetooth module, smart locks and other electronic equipment power supply, can also be used for cell phones and other mobile portable equipment emergency charging.

     

    Electrical Characteristics:
    Charging Current: Standard ~0.1C / Fast ~0.5A|or 0.5C
    Charging time: 0.1C*15hrs(Standard)/0.2C*7.5hrs(Fast)|With protection board may trigger the protection action first to stop charging.
    Standard charging method: 0.1C constant current (CC) charging to 4.2V, and then 4.2V constant voltage (CV) charging to current less than 0.01C.
    Discharge cut-off voltage: 2.75V
    Minimum storage voltage: 3.7V, otherwise it should be recharged in time

    *The above voltage is based on the measured value of the charging port/operating current is based on the smaller parameter.

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • 5V Reducation Voltage Lithium Battery

    5V Reducation Voltage Lithium Battery

     Special Batteries

    This series of products can maintain 5V constant voltage output, and small current will not automatically cut off the circuit. It can provide maximum 3A and instantaneous 5A working current, and the charging port can be used as a normal 7.4V battery pack. Charging must be done with a dedicated 8.4~9V charger.

    Mainly applicable to all kinds of 5V/4.8V DC input voltage microcontroller, medium-sized LED lighting fixtures, intelligent locks, micro-motor, outdoor power supply and other electronic equipment power supply, can also be used for cell phones and other mobile portable equipment emergency charging.

     

    Electrical Characteristics:
    Charging Current: Standard ~0.1C / Fast ~1A| or 0.5C

    Charging time: 0.1C*15hrs(Standard)/0.2C*7.5hrs(Fast)|With protection board may trigger the protection action first to stop charging.

    Standard charging method: 0.1C constant current (CC) charging to 8.4V, and then 8.4V constant voltage (CV) charging to current less than 0.01C.

    Discharge cut-off voltage: 5.5V

    Minimum storage voltage: 7.4V, otherwise it should be recharged in time

    *The above voltage is based on the measured value of the charging port/operating current is based on the smaller parameter.

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • Wanxiang / Hypertherm Series

    Wanxiang / Hypertherm Series

     E-Vehicle Batteries

    This series of lithium batteries for electric bicycles are assembled with high-performance 18650 lithium batteries from big brand factories, with sufficient capacity, stable performance and long-lasting range. The shell is made of ABS engineering plastic, which is fireproof, aging-resistant and corrosion-resistant. The base is made of high hardness metal, strong and durable, hidden, beautiful, flexible installation, can be hung in the body down tube, seat tube, front tube and other positions, and the car as a whole.

    At present, there are two voltages of 24V/36V, which are mainly applicable to various electric bicycles/assisted folding cars/converted cars/scooters, electric wheelchairs and other small vehicles or electric boats and other amusement equipment, and can also be used as a portable outdoor power supply or mobile back-up power supply.

  • Power Cylindrical Lithium Battery

    Power Cylindrical Lithium Battery

     Power Battery

    This series of batteries are mainly suitable for remote control cars/rail cars/toy tanks and other car models, remote control boats/hovercrafts/speedboats and other boat models, as well as some catapult children's toys and early learning learning supplies, power tools and so on.

    To:This series of power battery has high energy and does not come with protection plate, so it is strongly recommended to use a standard high quality special charger with constant current and constant voltage function for charging; in order to be safe, remember to charge under supervision and cut off the power supply immediately after full.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.5C

    Charging time: 0.1C*15hrs(standard)/0.5C*2.5hrs(fast)

    Standard charging method: 0.1C constant current (CC) charging to 4.2V/string, then 4.2V/string constant voltage (CV) charging to current less than 0.01C.

    Maximum charging current*: 0.5C/0.2C below 20°C

    Discharge cutoff voltage: 3.3V/string | 2.75V/string at normal magnification

    Minimum storage voltage: 3.7V/string, otherwise it should be recharged in a timely manner.

    *Voltage value multiplied by the number of cell strings when connected in series Current multiplied by the number of cell parallels when connected in parallel; operating current whichever is the smaller parameter.

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

     

     

  • Power Lithium Iron Phosphate Battery

    Power Lithium Iron Phosphate Battery

     Power Battery

    This series of batteries are mainly suitable for remote control cars/rail cars/toy tanks and other car models, remote control boats/hovercrafts/speedboats and other boat models, as well as some catapult children's toys and early learning learning supplies, power tools and so on.

    To:This series of power battery has high energy and does not come with protection plate, so it is strongly recommended to use a standard high quality special charger with constant current and constant voltage function for charging; in order to be safe, remember to charge under supervision and cut off the power supply immediately after full.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 3.65V/string, then 3.65V/string constant voltage (CV) charging to current less than 0.01C.
    Maximum charging current: 1C / 0.2C below 10°C
    Continuous discharge current: 1C/0.5C below 10°C
    Maximum discharge current: 2C/0.5C below 10°C
    Discharge cutoff voltage: 2.0V/string
    Minimum storage voltage: 3.2V/string, otherwise it should be recharged in time.

    *Voltage value multiplied by the number of cell strings when connected in series Current multiplied by the number of cell parallels when connected in parallel; operating current whichever is the smaller parameter.

     

    Temperature Characterization:
    Charge: 0~45℃ Discharge: -10~55℃ Storage: -10~45℃
    Relative humidity: 45~85%